or browse by category
Take a 17 question quiz to test and certify your knowledge of the tutorial-video course
Neutron 3 101 - Mixing With Neutron 3.
Get a mark of 80% or higher to pass this quiz!
Neutron 3's Compressor…
must have the same mode selected (clean or Vintage) for both compressor modules
can be selected in only one of the 5 module slots
has no automatic makeup gain or auto-release features
includes both clean and Vintage modes
Neutron 3's Gate…
implements Gating by making all automatic settings, with no user controls
implements Hysteresis as separate Open and Close Thresholds
cannot be used at the same time as the compressor
can only be used in the first slot
Neutron 3's Dynamic EQ…
is a module that combines Neutron's standard Compressor and EQ modules into one
lets the amount of boost or cut in a Band be determined by signal level
is not really an EQ at all, but a compressor that adds a fixed amount of EQ for presence
is an EQ specifically designed to be used on louder, more aggressive tracks and mixes
The Mix Assistant's Balance feature…
relies on IPC to auto-mix the levels of Neutron/Relay-equipped channels in a mix
allows for automatic level control of any standard brand/type of plug-in
automatically analyzes the stereo balance of the mix and creates a proper mono mix
automatically analyzes the stereo balance of the mix and centers it
Neutron 3's Masking Meter…
indicates how much brickwall masking to apply in mastering
determines the parts of a song where masking should be added
displays the potential overloads caused by the Masking Limiter
displays the frequencies where one track may be masking another
What is iZotope's Neutron 3?
A plug-in suite for all the standard delay-based effects
A plugin identical to Ozone, but for people with less mastering experience
A plugin that includes a display that detects out-of-tune pitch variations in a vocal track
A Channel Strip with intelligent mixing features
The Visual Mixer's graphic mixing display…
shows and allows the editing of level, pan, and stereo width for each enabled track
shows the tonal (frequency) balance of all tracks in its display
shows the types of effect processing used on each track
indicates whenever the overall mix level exceeds digital maximum (0dBfs)
Track Enhance is an intelligent processor. True or false?
The Relay plug-in…
determines the tempo of the audio in a track via an internal tap-tempo algorithm
taps the signal on a track and duplicates it in another channel strip
allows tracks with no Neutron 3 processors to be included in the Visual Mixer display
is a specialized send-return plug-in that offers i/o to/from the analog world
Neutron 3's Transient Shaper…
must render a new audio file destructively to create its effect
is a brickwall limiter that can be used for the purpose of loudness maximizing
can increase or decrease the Attack and Sustain of notes in a track
is a brickwall limiter that prevents transients from causing digital overloads
The main modules in Neutron 3 are…
EQ, Compressor, Exciter, Delay (x2), Transient Shaper, Gate
EQ (x2), Compressor, Reverb, Transient Shaper, Gate, Exciter
EQ (x2), Compressor, Delay, Reverb, Transient Shaper, Gate, Exciter
EQ, Compressor (x2), Exciter, Transient Shaper, Gate, Sculptor
Neutron 3's Sculptor module…
avoids any automatic processing in favor of manual EQ and compression adjustments
applied automatic EQ, reverb, and delay effects to a track
allows the user to fine-tune its automatic processing with simple controls
has no user controls over its automatic processing
The Track Enhance feature in Neutron 3…
automatically applies Strip Silencing to a track
arranges the modules and makes permanent settings that can't be changed
arranges and makes Suggested settings in the various processing modules
automatically Comps a track with multiple takes
What are Neutron Exciter's 4 saturation types?
Tube, Transistor, Transformer, Trash
Tube, Tape, Retro, and Warm
FET, Diode, Germanium, and Silicon
Preamp, Poweramp, Rectifier, and FET tube
Neutron 3's Limiter has three modes:
LL, SB, and MB
clean, vintage, and distortion
Peak, Average, and Clipping
IRC LL, IRC II, and Hard
The Tonal Balance Control plug-in…
lets the user make per-track changes to all delay effects from within the TBC plug-in
automatically readjusts the EQ settings of a mix for mastering purposes
lets the user make per-track EQ changes from within the TBC plug-in
lets the user make per-track changes to compression from within the TBC plug-in
Neutron 3 combines…
Ozone, RX, and Nectar into one plug-in
channel strip processing with intelligent mixing features
EQ, Compression, Delay, Reverb, and Distortion effects
all of iZotope's other processing plug-ins into one plug-in
Neutron 3 101
Mixing With Neutron 3
You have answered
out of 17
to take this quiz.
If you do not have an account, please
Get Your Grade
Nice try! Unfortunately you didn't have enough correct answers to pass the quiz. No sweat! You can retake a quiz once per day.
You need 80% to pass this quiz
Back to the Course
View My Grades
How are we doing?
We'd love your thoughts, feedback and questions regarding our new site. All feedback is appreciated!
We do not respond to this form! If you need support, please visit our
Thank you for your input!
Your message has been successfully sent
Don't Know Where To Start?
Ask A Course Advisor
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for:
Logic Pro X