macProVideo.com
Forums
  • jeff
    Posts: 85
    Joined: Nov 4th, 2007, 01:46
    what the heck ??
    I can't seem to watch MacProVideo tutorials when my Logic Application is open... no sound, also when I have iTunes open the sound goes all scratchy... only when logic is open I'm on OS X 10.4.11 and use Logic 7.2.3 and use a M-Audio Firewire 410 interface 1.3.2 - I use outputs 1&2 to feed my speakers and have optical outs sent to my Mac from Firewire
    Reply
  • Rounik Admin
    Posts: 8713
    Joined: Dec 16th, 2006, 08:13
    Re: what the heck ??
    Hi Jeff, I'm moving this thread to the NED sub forum for Mac. I have (and never have had) a problem running NED while Logic or other applications have been running... Please contact support directly on this: [url]http://www.macprovideo.com/support/[/url] Also, try: 1. restarting your mac 2. Repairing permissions 3. disconnecting the m-audio and using built-in audio for Logic, iTunes etc. Thanks, Rounik
    Reply
  • Zihymua
    Posts: 206
    Joined: Oct 30th, 2007, 04:46
    Re: what the heck ??
    Hi Rounik, is it possible Jeff is running in problems because he tried to work in two worlds at the same time Analog and Digital, for myself when i used optical in and out it is when i work in video and i am link to my ADAT and all my audio system switch to optical AlRobi
    Reply
  • Rounik Admin
    Posts: 8713
    Joined: Dec 16th, 2006, 08:13
    Re: what the heck ??
    Hi AlRobi, Good point! I don't use optical. Could you test out using optical and analog and NED and Logic and iTunes? Thanks Rounik
    Reply
  • Zihymua
    Posts: 206
    Joined: Oct 30th, 2007, 04:46
    Re: what the heck ??
    I tried to run NED when my computer assigned in Optical and it did not work
    Reply
  • Zihymua
    Posts: 206
    Joined: Oct 30th, 2007, 04:46
    Re: what the heck ??
    Hi Jeff, what is the reason why you tried to connect your firewire in Optical to your Mac and at the same time output in Analog, i do not understand the purpose, most of App do not work good in Optical and sometimes not at all, Optical it is target on very specific work like i am telling you in previous, i only use it with my ADAT because i have to for other audio task never AlRobi
    Reply
  • Zihymua
    Posts: 206
    Joined: Oct 30th, 2007, 04:46
    Re: what the heck ??
    Forget perhaps Christian can give us a hand on this, Rounik and Christian they know i am sure a lot more than me
    Reply
  • Rounik Admin
    Posts: 8713
    Joined: Dec 16th, 2006, 08:13
    Re: what the heck ??
    Hey AlRobi, Please, don't put yourself down!! I'm no expert with optical in's and out's so your expertise and knowledge are much valued! These forums are a community (a friendly and open one) and your suggestions and contributions are always appreciated. Thank you for testing this out :-) @ Jeff, I would be interested to know why you are using optical outs in your setup too... Cheers Rounik
    Reply
  • jeff
    Posts: 85
    Joined: Nov 4th, 2007, 01:46
    Re: what the heck ??
    Hey Guys No particular reason - when I first purchased my Mac - I was unfamiliar with Firewires and audio interfaces - so I purchased optical cables to route the "audio signal" back to my Mac from my audio interface. Is it necessary to re route the signal or does the Firewire cable take care of that? I figured optical was the ultimate connection. - this all started because i had issues running my audio monitors from the audio output at the rear of my MacPro- I've since sent them from my audio interface outs 1&2 thus I thought i need to re route signal back to the Mac ( I used the optical cabels) - I have my audio sound settings set to "Firewire 410 Multichannel" - I don't have the "optical digital in port" selected. thanks for the help Jeff
    Reply
  • Zihymua
    Posts: 206
    Joined: Oct 30th, 2007, 04:46
    Re: what the heck ??
    Jeff, connect your firewire and use the in and out of your M-Audio and with the M-Audio software go in the output mixer and you can controlled the volume of your monitors but dont forget to assigned firewire on your Mac and in Logic AlRobi
    Reply
You must be logged in to post a reply
Recent Threads
Recent Posts
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: