macProVideo.com
Forums
  • Re: Stuck sounds on every soft s
    Posts: 3
    Joined: Sep 8th, 2009, 02:31
    Re: Stuck sounds on every soft syn...
    Hi, I have same problem. Temporary fix for me is to switch off advanced usb driver use and use default mac drivers. P 78 of PCR manual. SYS10 to Off. I will check Roland site. cheers Foster
    Reply
  • Re: Stuck sounds on every soft s
    Posts: 3
    Joined: Sep 8th, 2009, 02:31
    Re: Stuck sounds on Mainstage
    I also found that when restarting hold down sustain pedal. Then send panic from PCR seems to be also required.
    Reply
  • Re: Stuck sounds on every soft s
    Posts: 3
    Joined: Sep 8th, 2009, 02:31
    Re: Stuck sounds on every soft syn...
    There are new drivers for PCR on Roland site for Snow Leopard. I don't have SL yet so can't comment.
    Reply
  • Humboldtstickman
    Posts: 7
    Joined: Oct 24th, 2007, 10:22
    Re: Stuck sounds on every soft syn...
    Thanks for all the advice. I found temp. fix here from another post on the presonus website: Go to preferences:control surfaces:configuration and there you have to select to install a new Baby HUI, then in input and output port of the device you select Faderpot and VOILA! it works fine!! I did this and rebooted logic 9 and the faderport, and it seems to be working now.
    Reply
You must be logged in to post a reply
Recent Threads
Recent Posts
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: