surface de controle
May 30th, 2010, 05:58
Paris le 31 mai 2010 Salut a tous, J'ai un petit souci! Pouvez vous faire quelque chose pour moi! J'ai une interface audio studio canvas sd-90 de edirol J'ai une surface de controle uc-33 evolution J'ai tÃ©lÃ©charger la template pour logic pro 8 chez le fabricant, qui une fois tÃ©lÃ©charger, et lancer avec logic, doit me permettre d'utiliser ma surface de controle pour gerer (controler logic); mais voilÃ , j'y suis pas du tout, je sais pas part quelque bout prendre ce problÃ¨me. je vous envoie ses Ã©lÃ©ments a votre bon vouloir, merÃ§i d'avence et cordialement. CeÃ§i est l'instruction de la template tÃ©lÃ©charger chez http://www.m-audio.fr/index.php?do=support Paris May 31, 2010 Hi everybody, I have a small problem! Can you do something for me! I have a audio interface studio canvas edirol sd-90 I have a control surface evolution uc-33 I download the template for logic pro 8 from the manufacturer, which when downloaded and run it with logic, should allow me to use my control surface to manage (controlling logic) but now, I'm not all I know to share a tip that problem. Â I send you its entirety at your whim, please Avence and cordially. This is the instruction to download the template http://www.m-audio.fr/index.php?do=support Logic Here is how to set it up: We've created Logic environment setups for the UC-33 and Keystation pro 88 which provide immediate hands-on control over the Track Mixer and individual Channel Strips. The new environment gives control over Volume, Pan and 2 Sends for the first 16 audio channels displayed in the Track Mixer plus full control over 4- band EQs, 8 Sends, Mute, Solo, Pan and Volume for each Channel Strip. UC-33 PC Mac Keystation Pro 88 PC Mac 1. Download the Logic setup. 2. Un-zip or un-stuff it. 3. Import the UC-33 or Keystation Pro 88 song file into Logic. 4. On the UC-33 recall preset number 011. On the Keystation Pro 88 recall preset 8. 5. Place the Channel Strip overlay over the UC-33. You should now be able to control volume, pan, solo, mute, 8 sends and even the 4 bands of EQ for the currently selected track. We have chosen the Parametric EQ algorithm for our setup, though you can use any of the other options with this setup. You will need to make sure to switch on each band individually using the EQ on/off buttons. You can also import the Environment into one of your own existing Logic files. From the Environment window in your own setup, go to 'Options' - 'Import Environment'. Choose what part of the Environment you want to install. We recommend 'Total Replace'. Then select the UC-33 Setup file. Using UC-33 for Multi-channel Mixing (for Keyststion Pro 88 see instructions with download): You can also use them as a multi-channel mixer in Logic. To change to multi-channel mixer mode press 7 on the UC-33. When the LCD display shows 127 when you press it, the switch in the Logic Environment is switched to the Multi-channel mixer mode. The UC-33 will now control the volume, pan and first two sends of the first 8 audio tracks. To switch back to the Channel Strip mode, just press '7' again (LCD displaying 000 when pressed). If you want to switch between controlling tracks 1-8 and 9-16 in the Multi-channel mode, press '8' on the numeric keypad (LCD showing 000 for tracks 1-8 and 127 for tracks 9-16). Remember to make sure you are already in the Multi-channel mode or pressing' '8' will have no effect. You can always check to see what position the switches are in by opening the Logic environment window.