Create a Sub Kick
Jul 24th, 2010, 07:29
Hi Guys, heres a little tip i found useful if u need to get a nice sub kick sound.
1. Create a kick sound Audio or midi and record onto a track. Could be the 4/4 house kick or anything u like.
2. create a bus (say no 25) make it mono and insert >utility>oscillator plug in. Set the plug in to sine wave and the freq. to around 200hz so you can here it.This will now create a constant tone.
3. under the Oscillator plug in insert a noise gate.
4. send your kick track to bus 25
5. set the sidechain input on the gate to bus 25
6. Turn the Oscillator plug in freq down to around 40-50hz or whatever freq gets the desired sub tone you want. change the attack and release settings to taste.
Every time the kick hits it will also trigger the sub tone
That should be it. enjoy
Mtec
