I record a song with vocals but when I listen to it after recording the song the vocals will only project through one speaker and not both... what am I doing wrong?
Hi Jeff,
Welcome to the forums :)
My guess is you are recording using one microphone through one input (MONO).
However, your track is set to record from input 1-2. This means input one would be L signal and input 2 the R signal...
Make sure the Input source is set correctly. i.e. if you are using one microphone to record voice or guitars then that is a mono source, so set the Input Source in the Track Info pane appropriately.
Let me know if that helps :)
Rounik
Ahh, Rounik... a very fast and comprehensive answer as usual... : )
Hi Jeff,
You could also check to make sure that the Pan Control is set to the centre position.
Cheers, Bj
