macProVideo.com
Forums
  • Digi
    Posts: 4
    Joined: Sep 29th, 2007, 05:29
    create submarine sonar ping fx
    Hello gang, does anybody have any ideas how to create a submarine sonar ping sound in Logic Pro 7? Any suggestions that point in the right direction are greatly appreciated. Many thanks for your time in advance. Cheers Frank
    Reply
  • Christian L
    Posts: 1413
    Joined: Aug 7th, 2006, 11:50
    Re: create submarine sonar ping fx
    Here's a way you could do it : 1-)Open up the ES-2... start with the "Vintage mix" preset. 2-)Change the 3rd oscillator to "Noise". 3-)On ENV 3, change the attack to 0ms / 1.60ms; Decay to 89ms;Sustain 0.055;-Time rise to -900;Release 15ms. 4-) Change the frequency of Osc 1 to 0s -18 c and Osc 2 to 0s 18c to create a slight modulation effect. 5-)Turn up the Analog button. 6-)Turn up the Intensity Control to taste to create a Chorus effect and turn down the tone midway. 7-)Insert the Bitcrusher (Resolution 9 bits, downsampling 1x) 9-)Insert a Space Designer with the "Deep Space" preset. Turn up the wet Rev slider. 10-)Use an EQ to create a Hi cut and slight boost at 300 hz. You could also add a very subtle tape delay with flutter and hi cut. Hit a key around g#5... Hope it helps... Of course you could also use a good sample with the EXS24!!!
    Reply
  • Digi
    Posts: 4
    Joined: Sep 29th, 2007, 05:29
    Re: create submarine sonar ping fx
    Hey Christian, many thanks for your elaborate description. I will give it a try as soon as I got a minute free. Many thanks again, greatly appreciated. Cheers Frank
    Reply
You must be logged in to post a reply
Recent Threads
Recent Posts
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: