Just purchased the EXS24 tutorial video. In chapter 14, 'Assigning the reference note', at the end of the tutorial there's a brief mention of the 'Tuner' tool. By placing a 'Tuner' insert on the EXS24 channel, you can work out the original reference note of your sample - sounds great, but it's not clear to me how I should use this. I start off with a sample in EXS24, (edit > new zone) Tuner tool at the ready (I have no clue what the original reference key is) so, what's the next and subsequent steps? Let me know if you need any more info'

Hi Rounik, Thank you for the warm welcome and thank you for the fast response. I'll read this advice and see if I have any additional questions. (Thank you also for the tip regarding original reference). Best, KBytes

This is in response to the 'S O U N D' (and why it sounds that way) video. When running a sine sweep using the Test Oscillator, what's the difference between Linear and Logarithmic modes? I've noticed that in Linear mode, even if I set the start freqreuncy to 20Hz it doesn't display on the Multi level metre,until approx 250hz. However on log mode, it does start from 20hz. With respect to these differences when would you use one and not the other? Are there any good tutorials that teach you how to properly calibrate your monitor speakers using these test tones?

Thanks Rounik, will do at some point. Meanwhile if someone knows the answer to this post, I'm listening.